All types of Plastic Moulds & DiesAll types of Plastic Moulds & Dies

At Alltech Engineering, we give foremost emphasis on accuracy. We produce Tools and Dies for many leading companies all over India and specialize in manufacturing Plastic Moulds. We are also engaged in the manufacturing of Blow Moulds, Compression Moulds and Die Casting Dies. We manufacture moulds for all types of Machines (Manual, Semi Automatic, Fully Automatic and Insert Moulding). We have all the adequate facilities along with professionally qualified designers. We use the CAD/CAM technology to attain that ultimate perfection. We utilize excellent and skilled machine operators and fitters up to the optimum level. We have produced several Moulds ranging from 0.5 gms to 5 kgs for various machines. We have prepared Multi Cavity Moulds, Family Moulds and Insert Moulds to perfection.

Apart from the above, the plastic moulds manufactured by us are of very high quality, which are suitable for longer production runs, resulting in smoother production and less maintenance cost.

Alltech Engineering has been manufacturing custom made flexible plastic products for commercial, industrial, home needs and applications. We possess Injection Moulding machines to produce various top quality plastic products. We are experts at producing Plastic Components ranging from .05 gms to 2 kgs. Our products are widely used in the Automobile Industry, Electronics Industry, Electrical and House Hold Articles, etc.

We have the required qualified operators and staff members along with an inbuilt Tool Room, because of which a lot of people prefer us. If any problem arises during the production or if any modification is required in the mould during mid production we can do it immediately in no time. Our products are designed in such a way so as to help companies improve on their quality of output, cut down on their costs and improve the competitive position in manufacturing industry segments

Hot Runner Tips and Moulds

D-M-E’s Polivalve Multi-Use Valve Gate Hot Runner System helps molders overcome the challenges associated with special shapes or multi-cavity parts where the volume of melt can differ significantly. The system enables easy injection flow in simultaneous or sequential filling to create parts with unusual, complex or hard-to-fill geometries or varying volumes. It also allows processors to mold multiple parts in different shapes and sizes, all in one cycle.

Polivalve features a bodiless tip, good for cosmetic applications and those requiring zero gate vestige, eliminating the need for secondary trimming operations and reducing overall costs to manufacture. New Integrity temperature controls will also be introduced at K by D-M-E, that provide a practical, affordable solution to the most demanding mold requirements.

New modules, mainframe, cabling and communications enable control of hundreds of zones and the most complex hot runners. Integrity’s patented slaving capabilities allow molders to offset the slaved zone from the master zone accurately and quickly. When a thermocouple fails, the failed zones slave to other similar zones (such as another nozzle) and can be adjusted if needed to slightly hotter or cooler temperatures than the master zone.

The Integrity is half the size of other temperature controls, and the module design simplifies control engineering and assembly time, while allowing easy expansion and fast reconfiguration later as needs change. Integrity measures both electrical current and line voltage, calculating the resistance of the heater and the output power, which means better problem recognition and correction on the plant floor. D-M-E, Stand 1F08.